How to clean the packing of the bath door

Description Are you worried about the dirt that collects on the rubber packing of the bath door? All kinds of dirt, How to clean glass shower doors such as soap scum and sebum dirt, collect in the bath, but the dirt that collects on the packing of the bath door is mainly mold. This time, I will introduce how to clean the packing of the bath door by removing such annoying mold.

Are you worried about the dirt that collects on the rubber packing of the bath door?

All kinds of dirt, such as soap scum and sebum dirt, collect in the bath, but the dirt that collects on the packing of the bath door is mainly mold.

Mold root in the packing, so it is not uncommon for it to not remove by simply cleaning it with a common bathroom cleaner and sponge.

For more interesting visit now waketech.net or also check this allpercentagecalculator.com 

This time, I will introduce how to clean the packing of the bath door by removing such annoying mold.

Precautions when using a mold remover

The dirt that occurs on the packing of the bath door is mainly black mold. If you want to clean it, a mildew remover that can disinfect and bleach is effective instead of a general bathroom cleaner.

There are many precautions to take when using mold removers, so we will introduce the precautions before introducing the cleaning method.

Use with good ventilation.

Chlorine in mold removers has a peculiar scent, so some people may feel sick if they continue to smell during cleaning.

We recommend that you ventilate well so that the odor does not accumulate.

Do not mix with acid detergent.

Chlorine-based mold removers generate harmful gases when mixed with acidic substances such as citric acid.

It is safe to use it in a state where it is not mixed with acidic substances, such as not using it immediately after using an acidic detergent or mixing it.

Recommended mold remover immediately after purchase.

The main component of the mold remover is gradually decomposed by light, germs, heat, etc., and the concentration decreases and the effect decreases. Therefore, if you use an old one, it may not fall off very much.

The effect will drop considerably after 3 months, so it is safe to consider buying a new one depending on the time of purchase.

Use by wearing rubber gloves or a mask.

Mold removers are highly alkaline and dissolve proteins, so if they get on your skin or get in your eyes, you may have trouble.

Wear rubber gloves, masks, goggles, etc., and use caution.

Also, when it gets on clothes, it may bleach and lose its color. It is easy to clean if you pay attention to your clothes.

How to clean the packing of the bath door

Here’s how to clean the packing of the bath door. I will introduce more than one, so why not clean the packing of the bath door with an easy-to-use cleaning method?

Cleaning method to pack with wrap

The first is a cleaning method that uses a wrap. Packing with plastic wrap has the effect of allowing the mold remover to penetrate the dirt and make it easier to remove.

[Tools required for cleaning the packing of the bath door]

・ Wrap

・ A foam-type mold remover

・ Dry towel

• toothbrush

There is no problem with using unnecessary towels and toothbrushes.

[Cleaning procedure]: How to clean glass shower doors

1. Wipe off the moisture on the packing so that the mold remover does not dilute.
2. Apply mold remover to black mold
3. Pack with plastic wrap so that the foam and mold adhere to each other.

* Lightly press from above so that the wrap does not float

Leave for 4.5 to 30 minutes (adjust according to the degree of dirt)

5. Peel off the wrap and wash off the mold remover thoroughly
6. Lightly rub the dirt that did not come off with a toothbrush

* Be careful as the packing will damage if you rub it strongly!

7. Rinse again and wipe off moisture to complete

If the dirt does not come off even after proceeding to step 6, it is effective to extend the time and try again.

You can also use tissue or kitchen paper for the pack. It is important to allow the mold remover to penetrate the dirt.

Cleaning method using liquid chlorine bleach and potato starch

If you don’t have a foam-type mold remover, you can use potato starch and liquid chlorine bleach.

[Tools required for cleaning the packing of the bath door]

・ Liquid chlorine bleach

• Starch

・ Disposable chopsticks

• Paper plate

・ Dry towel

[Cleaning procedure]

1. Thoroughly drain the packing
2. Mix potato starch with liquid chlorine bleach to make a paste

* A guideline for 20 to 30 ml of chlorine bleach per 2 tablespoons of potato starch

3. Use disposable chopsticks to apply a generous amount of paste to the dirt.
4. Leave it for 15 to 30 minutes, depending on how dirty it is
5. Rinse cleanly and complete

As with the wrap pack, if the dirt does not come off, it is recommended to rub it lightly with a toothbrush or repeat the same procedure.

Cleaning method using a gel-type mold remover: How to clean glass shower doors

Using a gel-type mold remover is highly effective and can be adhered to without using a wrap, so it does not take time and effort.

In addition, since it does not drip easily, it is also suitable for points where foam-type mold removers are difficult to apply, such as packing for bath doors.

If you want to buy a new mold remover for cleaning the packing of the bath door, why not consider this.

[Tools required for cleaning the packing of the bath door]

・ Gel type mold remover

• toothbrush
• towel

[Cleaning procedure] * This is an example and varies depending on the mold remover used.

1. Use a towel to drain the packing thoroughly.
2. Apply a mold remover to wrap the black mold

Leave it for 3.1 to 2 hours

4. Rinse thoroughly with water and wipe off the water to complete.

As with other cleaning methods, if the dirt does not come off, it is recommended to scrape it off with a toothbrush and repeat.

Red mold can be cleaned with the same tools and methods: How to clean glass shower doors

The dirt that occurs on the packing of the bath door is mainly black mold, but have you ever seen red slimy dirt apart from that?

The stain calls red mold, and to put it simply, germs gather together. It is a troublesome stain that is easy to reproduce and generate immediately when there is nutrition, such as moisture and sebum stains.

However, it is a stain that can easy removed by rubbing, and if it is thoroughly sterilized, it will be less likely to recur. Therefore, as with black mold, a mold remover that has a bactericidal action is effective.

Red mold can also use as food for black mold, so it recommends to clean it when you see it.

What is the method to prevent mold on the packing of the bath door?

I don’t want to be in a situation where “I just cleaned it, but I got black mold again!” Here, we will introduce how to prevent black mold that occurs on the packing of both doors.

Wipe off moisture, and dry / ventilate the bathroom

Black mold is easy to grow in a humid environment. Therefore, we recommend that you always wipe off any water after using or cleaning the bathroom. The rise in humidity can suppress.

Especially for packing and other points where black mold is likely to occur, it is safe to wipe it dry.

It is also important to use a bathroom dryer or ventilate to reduce the elevated humidity.

If you leave it to dry naturally without wiping or ventilating, the humidity will rise easily, and mold will grow during that time, so it recommends to dry it at an early stage.

Clean frequently and do not leave the cause of black mold

The nutrient source for black mold is all dirt collected in the bathroom, such as sebum stains, soap scum, hair, and red mold. Therefore, leaving those stains unattended will encourage the growth of black mold.

As a countermeasure, it is effective to clean it frequently to remove the nutrient source of black mold. If it is not sticky, you can remove it with a common bathroom cleaner.

Also, after cleaning, it is safe to dry it thoroughly so that the humidity does not rise.

Take a high-temperature shower of 50 ℃ or more for 5 seconds

Mold is vulnerable to high temperatures, and showering at 50 ° C or higher suppresses mold activity. However, the temperature does not rise completely by pouring hot water quickly, so the point is to spend 5 seconds or more per place.

In addition, since there is a risk of burns on the ceiling due to dripping hot water, we recommend using alcohol sterilization rather than this preventive method. It is easy to set kitchen paper on the floor mop, soak it in ethanol, and wipe it off.

Read Also: Difference between hay and straw